<p>volume, but not at the same time, seal thickness) of aluminum tape does not contain formaldehyde with the edges of the specimen. So, the final detection of formaldehyde released by the surface of the floor, do not have any relationship with the thickness of the floor. Some businesses say that high formaldehyde emissions are entirely misleading consumption. What is the current strengthening composite floor fried E0 standard was 0.5 E0, raise a Babel of criticism of? </p>
<p>0.7 is E1, 0.7 to 0.5 is a world of difference? Chinese at present floor national standard is not E1, E0 standard, E0 is Japan's JISA5908 base standard, it requires the formaldehyde release amount is less than or equal to 0.5mg/L. From the point of view of use, 0.5 and 0.7 are not very different. When testing, due to temperature, humidity, location, operating personnel and other factors, the test results will have some normal deviation, so as consumers, do not fall </p>
<p>into the digital game manufacturers. At the same time need to remind that, in the purchase must be aware of formaldehyde emissions, but strengthen the composite floor is one of the important indexes, not the only standard of the product, should also consider other indicators. Finally, in fact, strengthen the formaldehyde composite floor release life volume is very low, basically does not cause exceed the standard situation, but we often release source of indoor </p>
<p>wood composite plastic board in pakistan<br /> outdoor vinyl wood flooring<br /> amish composite lawn furniture</p>
The administrator has disabled public write access.
Delhi Expat is a non profit venture aimed at making life easier for the expat community in Delhi. If you feel this is a good resource, and wish to support us, please click below to donate any amount of your choice. Thank you for your support!