Welcome, Guest
Username: Password: Remember me
What are the best places to shop in Delhi? Fancy the larger malls, or are the roadside markets more "your thing"? Discuss here!

TOPIC: melted in water

melted in water 1 year 1 month ago #4221

  • qizhen111
  • qizhen111's Avatar
  • Platinum Member
  • Posts: 2948
  • Karma: 0
<p>Acrylate: pure liquid, open the lid that is used. Water, can be melted in water, it is easy to combine with the ground cracks, forming a solid waterproof layer, waterproof better than flexible mortar, the thickness of 2mm above. After brushing need to brushed or sand surface treatment, to increase the friction, easy to tile. Due to its good waterproofing properties, flexible mortars and acrylates are more suitable for use in long-term immersion environments and dry slower in cold climates. 4. One-component polyurethane: indoor and outdoor use, brushing thick, about 2 mm, and the elastic tension in more than 300%, cracking of any substrate will not make it cracking, the best waterproofing effect.</p><p> Although the safety performance control in the list of environmental requirements, but the smell of this waterproof coating larger, most people unacceptable, and individual brands of non-compliance of environmental performance. Polyurethane is gelatinous, very thick, the need to use scraper construction, it is laborious, more complicated. Finish the paint after brushing needs surface treatment, razor or sand to increase friction, easy to tiling, in the damp climate conditions, the drying speed is relatively slow. The drying rates of these four coatings are affected by the weather and dry more slowly in cold climates, but the climate has no effect on the waterproofing effect. </p><p>In general, mortar drying cycle earlier, acrylic and polyurethane drying cycle is 24 to 48 hours longer. "One-component", "two-component" difference: mortar are two-component polymer, which is made from the emulsion and mortar ratio; acrylate and polyurethane without mortar ratio, is a single component. Brush the grassroots before handling. Water-based paint brushing and ground grassroots conditions have a great relationship, the more grass-roots level, the more paint used. Therefore, before brushing water-proof coating, the best grass-roots simple treatment, as far as possible the grass-roots level processing. Second, should ensure that the ground dust-free, soil-free, oil-free, can take the mop carefully mopping the floor to remove all the dust, otherwise it will cause cracking of waterproof paint peeling, affecting the waterproof effect.</p>
The administrator has disabled public write access.
Time to create page: 0.141 seconds

Online now

Latest posts

Delhi Expat is a non profit venture aimed at making life easier for the expat community in Delhi. If you feel this is a good resource, and wish to support us, please click below to donate any amount of your choice. Thank you for your support!