<p>whole, the steel mesh fixed on the brick wall. If necessary, two layers of steel mesh can be sealed. Red brick in the tank bracket edges and gaps at the red brick seal, water tank in front of about 50mm red brick wall, reserve tank protection box, flushing pipes, drains, screw position. Red brick minimum thickness of about 50mm. Step Seven: hanging toilet installation Fake wall decoration is completed, the tiles have also been posted well. Place the noise </p>
<p>insulation mat on the decorative wall. Measure and cut the pipe and install the toilet according to the screw position. Screw length over the ceramic surface, the toilet fixed to the wall. When installing wall-mounted toilets, adjust the level of the toilet. After the installation is completed, cut off the extra noise insulation mat and you're done. The above content is the Xiaobian Guo Xiaobian introduced you to install the wall-mounted toilet, I hope for your help, for </p>
<p>more toilet installation knowledge, please continue to pay attention to every home decoration network.The structure of building components has a direct impact on the safety and useful life of the residence, and how to reduce this potential safety hazard. At the beginning of the design, the bearing capacity of each component of the building component should be accounted for. In this article, Xiaobian mainly introduces the construction requirements of the beam, </p>
The administrator has disabled public write access.
Delhi Expat is a non profit venture aimed at making life easier for the expat community in Delhi. If you feel this is a good resource, and wish to support us, please click below to donate any amount of your choice. Thank you for your support!